Eleaf iKuu i80 Kit with Melo 4

Eleaf iKuu i80 Kit with Melo 4

To complement their superb range of simple e cigarette devices, Eleaf also offer this advanced Ikuun i80 2ml Starter Kit. Even with its amazing range of mid-power vaping functions, the Ikuun i80 mod’s built-in 3000mAh battery makes this kit easy to manage. For total peace-of-mind, the 80 Watt Ikuun mod comes with special battery temperature monitoring systems. This automatic cut-out feature halts battery charging if the temperature rises above safe limits.


The Ikuun i80 starter kit also features one of Eleaf’s most exciting sub-ohm atomizers – the Melo 4 tank. The D22 version that comes with this kit has a TPD compliant tank capacity of 2ml. The Melo 4 tank also has fully adjustable airflow and a stylish, push-back top-cap. The permanently attached top-cap makes it much easier to do a hassle-free e juice refill on the move.

For a better user experience, Eleaf have designed all of their Ikuun mods with high-capacity internal batteries. The increased battery power means that you can vape at higher wattages without worrying about your batteries running out of charge. The Ikuun i80 mod offers 3 vaping modes: variable wattage (VW), bypass, and temperature control (TC) for Stainless Steel, Nickel and Titanium coils.

Basic variable wattage mode is extended with a special coil pre-heating feature. Many experienced vapers use this function to boost the warm-up time of atomizers fitted with Clapton coils. ‘Bypass’ mode simulates a simple direct-output device, like an eGo battery. Temperature control modes offer a smooth vaping experience with ‘dry hit’ protection. The Ikuun mod range also has variable maximum power settings and 3 special TCR memory slots for advanced TC vapers. All vape parameters are displayed on a simple, 0.91 inch screen. A full-length Fire bar is ergonomically shaped for comfort.

The Ikuun i80 starter kit comes with fitted and spare Kanthal coils. These coils are designed for vaping in variable wattage mode only. The coils deliver a great vape at power settings of 30 Watts and higher. To monitor your e juice usage, try out the Ikuun mod’s vape timer and puff counter functions. As well as handling safer USB charging, you can also use the supplied USB cable to upgrade the mod’s on-board software, or upload a personalised logo for your device!

The Eleaf Ikuun i80 2ml starter kit can be ordered in one of 6 fabulous colourways: Blue, Red, White, Greenery, Black or Stainless Steel.


Contents:
1 x Eleaf Ikuun i80 Mod
1 x Eleaf Melo 4 D22 Sub-Ohm Tank
1 x Fitted 0.3 Ohm EC2 Coil
1 x Alternative 0.5 Ohm EC2 Coil
1 x Set of Spare Seals & O Rings
1 x USB Cable for Recharging, Upgrades & Uploads
1 x Eleaf User Manuals 

Eleaf Ikuun i80 Mod Features:
Size: 75.5mm tall, 38mm long, 27mm wide
Fits tanks up to 24mm dia. without overhang
Connection: 510 screw
Pin: Sprung connection
Style: Fashionable & compact, mid-power box mod with built-in battery
Internal battery: 3000mAh capacity (with charge temp monitoring)
Auto cut-out feature for safer USB charging
USB charge & upgrade/upload cable provided
Fast 2 Amp charging capability (wall adapter not supplied)
USB upload facility for 96 x 32px custom logo (BMP)
Simple, 0.91 inch OLED display screen
Features a vape timer and puff counter
Screen flip and device lock features
Simple + & - adjuster buttons
Modes: Variable wattage (VW), Bypass & temperature control (TC)
Three custom TCR coil wire memories
Output power: 1 to 80 Watts
Temperature control settings: 100ºC to 315ºC
VW & Bypass mode coil resistance range: 0.1 to 3.5 Ohms
Easily adjustable coil pre-heating settings in VW mode
TC / TCR coil resistances: 0.05 to 1.5 Ohms
TC coil wires: Titanium, Stainless Steel & Ni200
Control board memory for 3 user TCR settings
Full adjustable wattage in TC & TCR modes
Auto detection of new atomizer
5 Fire bar clicks to switch on/off
10 second prolonged firing safety cut-out
Atomizer fault detection
Low battery voltage & overcharge detection
TC coil overheating indication
Low/high battery charging temperature cut-out
Fashionable styling & colourways
Great as a first sub-ohm mod
No complicated battery selection/handling required
Enough capacity for extended vaping
A practical mod for everyday vaping
Compatible with a wide range of aftermarket atomizers
Available in Stainless Steel, White, Greenery, Blue, Black, or Red.
 
Eleaf Melo 4 D22 Atomizer Tank Features:
Diameter: 22mm
Height: 52.5mm (including drip-tip)
E juice fill: 2ml (TPD compliant)
One-click, retracting top cap for speedy refills
Connector: 510 screw & fixed pin
Metal components: Stainless Steel
E juice tank: Toughened Pyrex glass
Fitted with a 510 Delrin drip-tip
Easy coil replacement after unscrewing base
Fitted with 0.3 Ohm Eleaf EC2 Kanthal co